3D Printed Display Base Using Re-purposed Computer Part
Hi, Everyone! Over the years, I've accumulated a small stack of 3.5-inch hard disk drives that I always had intentions of performing deep data wipes on or destroying. I never get around to them, though, so they just sit around. Recently, I thought about how I could re-purpose those drives so that they wouldn't end up being yet another bunch of discarded wasteful tech. One of the nicer parts of a hard disk drive are the data disc "platters." There are usually one or more of these platters in each drive, with each one being fairly rigid and having a nice smooth mirror finish. People have re-purposed them into things such as the face of small clocks and combined multiples of them to use as hanging decorations. For me, I decided to use them as part of a custom model display base. I came up with a 3D printed four piece design. There is an outer shell with a rounded edge at the top. An inner shell - which can house a small bit of electronics and...