Revell 1:72 Razor Crest and 1:65 Outland TIE Fighter

Hi, Everyone!

Revell Germany will be expanding their Star Wars lineup with two new-tooled kits from The Mandalorian series - the Mandalorian's Razor Crest and Moff Gideon's Outland TIE Fighter!

Razor Crest (kit number 06781):

  • 1:72 scale
  • About 337 mm (13.27 inches) in length
  • 70 parts
  • Detailed interior and cockpit
  • Movable loading ramps
  • Din Djarin pilot figure
  • Landing gear can be built either retracted or extended
  • Display stand included
  • Decal sheet included
  • 56.99 Euro (about $67.00 U.S.D.) MSRP
  • November 2021 original release


Outland TIE Fighter (kit number 06782):

  • 1:65 scale
  • About 167 mm (6.57 inches) in length
  • 51 parts
  • Solar panels can be posed in-flight fully-open, partially-folded, or landed fully-folded
  • Detailed cockpit
  • Pilot figure
  • Landing gear can be built either retracted or extended
  • Display stand included
  • Decal sheet included
  • 38.99 Euro (about $46.00 U.S.D.) MSRP
  • November 2021 original release


Check out the images below which include official box art and test shot images of both releases from Key Model World (https://www.keymodelworld.com/article/new-172-mandalorian-razor-crest-revell and https://www.keymodelworld.com/article/revells-new-all-terrain-tie-fighter).

Stay tuned...

:)



























Comments

  1. gregFebruary 23, 2022 at 10:41 PM

    Revell's kit looks pretty fantastic, but I'm holding off until AMT releases their own Razor Crest and then make a decision which one I want to get. I imagine that both will have their own plusses and minuses, making neither one superior to the other.

    ReplyDelete

Post a Comment

Popular posts from this blog

Comparing The AMT 1:650 TOS Enterprise Deflector Dish Assemblies With A 3D Printed Version

Image
Hi, Everyone! I started a project to make a more accurate deflector dish assembly for the AMT / ERTL / Round 2 1:650 TOS U.S.S. Enterprise model kit. Back in the early 1970s, AMT changed the tooling of their 1:650 U.S.S. Enterprise model.  Although the kit itself from its original 1966 tooling had its accuracy problems, the changes made in the early 1970s created even more issues.  One of the issues was the deflector dish assembly: The housing was changed / simplified where the outside wall was raised higher, the inner three stepped rings were all made the same height as the outside wall, and the three "extrusions" from the secondary hull were added. The dish assembly was changed from an overly large dish with an equally overly long stem to a detail-less pie pan looking dish with a shortened stem.   When the Smithsonian put together the team for the 2016 TOS Enterprise 11-foot filming miniature restoration project, Gary Kerr - Star Trek historian and filming miniature ...
Read more

Information Preservation - The New Enterprise Photo Survey - By Phil Broad

Image
Hi, Everyone! Here is another blog article that I put together in order to preserve modeling information originally posted on other sources. Back in the 2000s, Star Trek fan and archivist Phil Broad posted various black and white photos of the Enterprise refit filming miniature.  Since detailed photographs of the Enterprise refit filming miniature during the time of Star Trek: The Motion Picture 's production are generally scarce, Phil's pictures are unique in that they were taken by him after the completion of TMP but before the production of Star Trek II: The Wrath of Khan .  This makes the photos quite valuable as reference images to anyone who is researching the miniature as it appeared in TMP . Phil put up his pictures on his now-defunct website hosted by now-gone service provider Cloudster.com.  The pictures themselves have not been considered rare for quite some time and can be found elsewhere, but through the magic of the Internet Archive Wayback Machine his web...
Read more

[In The Stash] Monogram 1:48 Draconian Marauder

Image
Hi, Everyone! In 1978, the year after the original Star Wars became a successful worldwide phenomenon, Glen A. Larson and Universal Studios began production on a planned series of Buck Rogers TV movies for NBC.  During that same year, the pilot for Battlestar Galactica was re-edited into a theatrical movie which ran in some countries and in key locations in North America.  That film did well at the box office, so Universal decided to release the first Buck Rogers TV movie in theaters as well.  The box office returns were good which led NBC to commission a weekly TV series instead of more television movies.  Thus Buck Rogers In The 25th Century began on September 20, 1979. Given the subject matter, the show was decidedly campy with production values that easily date the episodes with 1970s futurism.  However, the two seasons of Buck Rogers gave viewers a few iconic goodies including the suave and charming Captain William "Buck" Rogers, the oftentimes Sp...
Read more