Round 2 Star Trek Kits At 2019 Toy Fair New York

Hi, Everyone!

The 2019 Toy Fair New York took place from February 16 to 19, and Round 2 was there to show off their upcoming Star Trek model kit releases.  Check out the information below and the pictures from TrekCore!

AMT 1:3200 Romulan Warbird D'deridex-class (kit number AMT1125):
  • 20 parts
  • Dome base carried over from the 2012 re-release
  • Updated decal sheet carried over from the 2012 re-release
  • About 12.75 inches (32.4 cm) in length when built
  • Full-color paint and water slide decal placement guide
  • Glue-together kit


 AMT 1:2500 U.S.S. Enterprise NCC-1701-D (kit number AMT1126):
  • 9 parts
  • Dome base carried over from the 2017 AMT 1:2500 U.S.S. Enterprise box set
  • Complete aztec and markings decal sheets carried over from the 2017 AMT 1:2500 U.S.S. Enterprise box set
  • About 10 inches (254 mm) in length when built
  • Full-color paint and water slide decal placement guide
  • Snap-together kit




 Polar Lights 1:1000 Enterprise NX-01 (kit number POL966):
  • 84 parts
  • Includes optional refit parts carried over from the 2013 re-release
  • Includes dome base carried over from the 2013 re-release
  • Updated decal sheet includes markings for Enterprise NX-01, NX-01 refit, Columbia NX-02, and new Mirror Universe I.S.S. Enterprise NX-01 and I.S.S. Avenger NX-09
  • Full-color paint and water slide decal placement guide
  • Snap-together kit




 Polar Lights 1:2500 U.S.S. Discovery NCC-1031 (kit number POL961):
  • 2019 new tool release
  • Includes dome base
  • Complete aztec and markings decal sheets
  • About 11.8 inches (299.72 mm) in length when built
  • Full-color paint and water slide decal placement guide
  • Snap-together kit



The re-releases are scheduled to ship during the mid-March to April 2019 time frame.  The Discovery kit will most likely begin shipping to retailers during late-Spring to Summer 2019.

Stay tuned...

:)

Comments

Post a Comment

Popular posts from this blog

Comparing The AMT 1:650 TOS Enterprise Deflector Dish Assemblies With A 3D Printed Version

Image
Hi, Everyone! I started a project to make a more accurate deflector dish assembly for the AMT / ERTL / Round 2 1:650 TOS U.S.S. Enterprise model kit. Back in the early 1970s, AMT changed the tooling of their 1:650 U.S.S. Enterprise model.  Although the kit itself from its original 1966 tooling had its accuracy problems, the changes made in the early 1970s created even more issues.  One of the issues was the deflector dish assembly: The housing was changed / simplified where the outside wall was raised higher, the inner three stepped rings were all made the same height as the outside wall, and the three "extrusions" from the secondary hull were added. The dish assembly was changed from an overly large dish with an equally overly long stem to a detail-less pie pan looking dish with a shortened stem.   When the Smithsonian put together the team for the 2016 TOS Enterprise 11-foot filming miniature restoration project, Gary Kerr - Star Trek historian and filming miniature ...
Read more

Information Preservation - The New Enterprise Photo Survey - By Phil Broad

Image
Hi, Everyone! Here is another blog article that I put together in order to preserve modeling information originally posted on other sources. Back in the 2000s, Star Trek fan and archivist Phil Broad posted various black and white photos of the Enterprise refit filming miniature.  Since detailed photographs of the Enterprise refit filming miniature during the time of Star Trek: The Motion Picture 's production are generally scarce, Phil's pictures are unique in that they were taken by him after the completion of TMP but before the production of Star Trek II: The Wrath of Khan .  This makes the photos quite valuable as reference images to anyone who is researching the miniature as it appeared in TMP . Phil put up his pictures on his now-defunct website hosted by now-gone service provider Cloudster.com.  The pictures themselves have not been considered rare for quite some time and can be found elsewhere, but through the magic of the Internet Archive Wayback Machine his web...
Read more

Information Preservation - Painting the Refit (ST:TMP) - By Andy "Gunstar1" Grams on Hobby Talk

Image
Hi, Everyone! Here is another blog article that I put together in order to preserve modeling information originally posted on other sources. While doing some casual Enterprise refit painting research, I came across a very insightful forum thread on Hobby Talk that was started on June 22, 2007 by forum member Andy "Gunstar1" Grams.  It was entitled "Painting the Refit ( ST:TMP )."  Here is the link: https://www.hobbytalk.com/threads/painting-the-refit-st-tmp.188494/ . Andy started that particular thread with knowledge gained from personal conversations he had with Paul Olsen, the one who performed most of the paint work on the Enterprise refit filming miniature.  The Hobby Talk forum discussion ended up being 12 pages long with Andy's last significant contribution to it on May 20, 2009.  Andy is still seen on Hobby Talk nowadays but has not been a significant contributor to any forum discussions there since 2010. Because of Andy's unique position of having di...
Read more