Revell 1:600 and 1:677 Star Trek U.S.S. Enterprise and U.S.S. Voyager

Hi, Everyone!

Revell Germany is getting ready to re-release their 1:600 TOS U.S.S. Enterprise and 1:677 U.S.S. Voyager model kits!

The Voyager kit was last released in 2009, and the Enterprise kit came out in 2011.  Both will remain unchanged with the exceptions of new box art that conforms to CBS' latest Star Trek merchandising guidelines and a new color assembly booklet for the Voyager kit.

U.S.S. Enterprise NCC-1701 (kit number 04991):

  • 1:600 scale
  • 481 mm (18.937 inches) in length
  • 117 parts
  • Extensive, two-part saucer section
  • Separate command bridge
  • Multi-part deflector and sensor
  • Large, two-part secondary hull
  • Multi-part warp nacelles with separate pylons
  • Many transparent parts, including Bussard collectors and position lamps
  • Display stand
  • Clear building instructions with painting tips in color booklet
  • Comprehensive water slide decals with markings for the Enterprise, Potemkin, and Constellation

U.S.S. Voyager NCC-74656 (kit number 04992):

  • 1:677 scale (marked as 1:670 on the packaging)
  • 514 mm (20.2362 inches) in length
  • 67 parts
  • Extensive, two-part hull
  • Movable warp engine pylons
  • Many transparent parts including the warp field generators, deflector, and Bussard collectors
  • The shuttle bay can be constructed in the open or closed position
  • Display stand
  • Easy to understand assembly instructions with suggestions for painting in new color booklet
  • Complete sheet of decals

Check out the official box art art pictures below!

The Enterprise assembly instructions in PDF format can be found here: https://stage.revell.de/fileadmin/import/images/bau/04991_%23BAU_USS_ENTERPRISE_NCC_1701.PDF  The new, color Voyager assembly instructions in PDF format can be found here: https://stage.revell.de/fileadmin/import/images/bau/04992_%23BAU_USS_Voyager.pdf

These two kits should begin shipping in late-May 2019.

Stay tuned...

:)







Comments

Post a Comment

Popular posts from this blog

Comparing The AMT 1:650 TOS Enterprise Deflector Dish Assemblies With A 3D Printed Version

Image
Hi, Everyone! I started a project to make a more accurate deflector dish assembly for the AMT / ERTL / Round 2 1:650 TOS U.S.S. Enterprise model kit. Back in the early 1970s, AMT changed the tooling of their 1:650 U.S.S. Enterprise model.  Although the kit itself from its original 1966 tooling had its accuracy problems, the changes made in the early 1970s created even more issues.  One of the issues was the deflector dish assembly: The housing was changed / simplified where the outside wall was raised higher, the inner three stepped rings were all made the same height as the outside wall, and the three "extrusions" from the secondary hull were added. The dish assembly was changed from an overly large dish with an equally overly long stem to a detail-less pie pan looking dish with a shortened stem.   When the Smithsonian put together the team for the 2016 TOS Enterprise 11-foot filming miniature restoration project, Gary Kerr - Star Trek historian and filming miniature ...
Read more

Information Preservation - The New Enterprise Photo Survey - By Phil Broad

Image
Hi, Everyone! Here is another blog article that I put together in order to preserve modeling information originally posted on other sources. Back in the 2000s, Star Trek fan and archivist Phil Broad posted various black and white photos of the Enterprise refit filming miniature.  Since detailed photographs of the Enterprise refit filming miniature during the time of Star Trek: The Motion Picture 's production are generally scarce, Phil's pictures are unique in that they were taken by him after the completion of TMP but before the production of Star Trek II: The Wrath of Khan .  This makes the photos quite valuable as reference images to anyone who is researching the miniature as it appeared in TMP . Phil put up his pictures on his now-defunct website hosted by now-gone service provider Cloudster.com.  The pictures themselves have not been considered rare for quite some time and can be found elsewhere, but through the magic of the Internet Archive Wayback Machine his web...
Read more

[In The Stash] Monogram 1:48 Draconian Marauder

Image
Hi, Everyone! In 1978, the year after the original Star Wars became a successful worldwide phenomenon, Glen A. Larson and Universal Studios began production on a planned series of Buck Rogers TV movies for NBC.  During that same year, the pilot for Battlestar Galactica was re-edited into a theatrical movie which ran in some countries and in key locations in North America.  That film did well at the box office, so Universal decided to release the first Buck Rogers TV movie in theaters as well.  The box office returns were good which led NBC to commission a weekly TV series instead of more television movies.  Thus Buck Rogers In The 25th Century began on September 20, 1979. Given the subject matter, the show was decidedly campy with production values that easily date the episodes with 1970s futurism.  However, the two seasons of Buck Rogers gave viewers a few iconic goodies including the suave and charming Captain William "Buck" Rogers, the oftentimes Sp...
Read more