Max Factory 1:20 Macross VF-1 Super / Strike Valkyrie in Fighter Mode

Hi, Everyone!

After the successful release of the massive 1:20 VF-1 Super / Strike Valkyrie in Gerwalk Mode in November 2018 (kit number MF-25), Max Factory is ready to put out their second gigantic 1:20 Macross vehicle kit..the VF-1 Super / Strike Valkyrie in Fighter Mode (kit number MF-37) as seen in the classic 1984 Do You Remember Love? anime movie!

  • The model will measure 713 mm long , 719 mm wide, and 369 mm tall (28.0709 inches x 28.3071 inches x 14.5276 inches)
  • Equip the model with either the Super or Strike pack
  • The head at the underside of the fuselage will have parts to build it as either the A, J, or S types
  • Wing angle can be adjusted after assembly
  • Included seated figure will have on a flight suit the same as what the character Hikaru Ichijyo wore
  • Parts will be molded in five different colors so painting will not be necessary
  • Stickers will be included to recreate Hikaru Ichijou's Valkyrie
  • Canopy will be virtually seamless with the fuselage
  • Parts will be made of ABS and styrene
  • Under-wing armament and water slide decal sheet sets will be sold separately
  • September 2019 scheduled release
  • 36852 yen (currently about $332.00 U.S.D.) MSRP

Check out below for official images!

Pre-orders are now available at HobbyLink Japan. I'm sure other kit exporters such as Hobby Search will follow soon.

Start saving up again, Macross / Robotech fans!

Stay tuned...

:)












Comments

Post a Comment

Popular posts from this blog

Polar Lights / Round 2 1:48 Area 51 UFO

Image
Hi, Everyone! Back in 2019, Round 2 successfully re-released the 1954 Lindberg 1:48 Flying Saucer kit as the Polar Lights Plan 9 From Outer Space Flying Saucer (kit number POL970).  If you think Round 2 is done with flying objects that go unidentified, think again!  The Polar Lights Area 51 UFO (kit number POL982) will head to retailers soon! 1:48 scale Originally released by Testors in 1996 (kit number 576) and then by Lindberg in 2007 (kit number 91006) 13-inches (330.2 mm) in diameter Represents an alien craft allegedly hidden in Nevada by the United States government as described by former government physicist Bob Lazar Parts included for simplistic interior, alien figures, and government soldier Clear parts allow for lighting (electronics not included) $36.99 U.S.D. MSRP Early-2021 release At this time, official images haven't yet been released.  However, check out pictures of the 2007 Lindberg release below! Stay tuned... :)
Read more

Trumpeter Transformers Blitzwing

Image
Hi, Everyone! Trumpeter got into the growing Transformers models game in 2020 with their officially-licensed Autobot Bumblebee kit based off the character from the 2018 well-received hit film.     A second kit is coming...the Decepticon Blitzwing! Non-scale - will be about 13 cm (5.12 inches) tall when fully assembled Non-transforming figure Various points of articulation allow for posing Parts will be made of ABS and PVC plastics Snap together fit Includes display base Summer 2021 release Check out the images below from the Shizuoka Hobby Show 2021 in Japan and from the Show.Z Store. Trumpeter plans on releasing more Bumblebee movie model kits including Optimus Prime, Wheeljack, and Soundwave. Stay tuned... :)
Read more

Revell 1:72 Razor Crest and 1:65 Outland TIE Fighter

Image
Hi, Everyone! Revell Germany will be expanding their Star Wars lineup with two new-tooled kits from The Mandalorian series - the Mandalorian's Razor Crest and Moff Gideon's Outland TIE Fighter! Razor Crest (kit number 06781) : 1:72 scale About 337 mm (13.27 inches) in length 70 parts Detailed interior and cockpit Movable loading ramps Din Djarin pilot figure Landing gear can be built either retracted or extended Display stand included Decal sheet included 56.99 Euro (about $67.00 U.S.D.) MSRP November 2021 original release Outland TIE Fighter (kit number 06782) : 1:65 scale About 167 mm (6.57 inches) in length 51 parts Solar panels can be posed in-flight fully-open, partially-folded, or landed fully-folded Detailed cockpit Pilot figure Landing gear can be built either retracted or extended Display stand included Decal sheet included 38.99 Euro (about $46.00 U.S.D.) MSRP November 2021 original release Check out the images below which include official box art and test shot imag
Read more