Polar Lights / Round 2 Pre-Assembled 1:350 TOS U.S.S. Enterprise

Hi, Everyone!

After two products aimed at genre collectors - the pre-assembled Space: 1999 1:48 22-inch Eagle 2 Transporter (kit number MPC917) and the pre-assembled Star Trek: Discovery 1:2500 12-inch U.S.S. Discovery (kit number POL979) - Round 2 will be going big for Star Trek fans!  Early-2021 will see the release of the pre-assembled TOS U.S.S. Enterprise (kit number POL978)!

  • 1:350 scale
  • 32-inches (81.28 cm) long
  • Fully decorated with accurate colors and weathering
  • Model comes in five sections that fit together easily for display
  • Dome display base and rod included
  • $451.99 U.S.D. MSRP
  • Early-2021 release


Check out the official images below!

Stay tuned...

:)








Comments

Post a Comment

Popular posts from this blog

Comparing The AMT 1:650 TOS Enterprise Deflector Dish Assemblies With A 3D Printed Version

Image
Hi, Everyone! I started a project to make a more accurate deflector dish assembly for the AMT / ERTL / Round 2 1:650 TOS U.S.S. Enterprise model kit. Back in the early 1970s, AMT changed the tooling of their 1:650 U.S.S. Enterprise model.  Although the kit itself from its original 1966 tooling had its accuracy problems, the changes made in the early 1970s created even more issues.  One of the issues was the deflector dish assembly: The housing was changed / simplified where the outside wall was raised higher, the inner three stepped rings were all made the same height as the outside wall, and the three "extrusions" from the secondary hull were added. The dish assembly was changed from an overly large dish with an equally overly long stem to a detail-less pie pan looking dish with a shortened stem.   When the Smithsonian put together the team for the 2016 TOS Enterprise 11-foot filming miniature restoration project, Gary Kerr - Star Trek historian and filming miniature info
Read more

Trumpeter Transformers Blitzwing

Image
Hi, Everyone! Trumpeter got into the growing Transformers models game in 2020 with their officially-licensed Autobot Bumblebee kit based off the character from the 2018 well-received hit film.     A second kit is coming...the Decepticon Blitzwing! Non-scale - will be about 13 cm (5.12 inches) tall when fully assembled Non-transforming figure Various points of articulation allow for posing Parts will be made of ABS and PVC plastics Snap together fit Includes display base Summer 2021 release Check out the images below from the Shizuoka Hobby Show 2021 in Japan and from the Show.Z Store. Trumpeter plans on releasing more Bumblebee movie model kits including Optimus Prime, Wheeljack, and Soundwave. Stay tuned... :)
Read more

Information Preservation - The New Enterprise Photo Survey - By Phil Broad

Image
Hi, Everyone! Here is another blog article that I put together in order to preserve modeling information originally posted on other sources. Back in the 2000s, Star Trek fan and archivist Phil Broad posted various black and white photos of the Enterprise refit filming miniature.  Since detailed photographs of the Enterprise refit filming miniature during the time of Star Trek: The Motion Picture 's production are generally scarce, Phil's pictures are unique in that they were taken by him after the completion of TMP but before the production of Star Trek II: The Wrath of Khan .  This makes the photos quite valuable as reference images to anyone who is researching the miniature as it appeared in TMP . Phil put up his pictures on his now-defunct website hosted by now-gone service provider Cloudster.com.  The pictures themselves have not been considered rare for quite some time and can be found elsewhere, but through the magic of the Internet Archive Wayback Machine his website p
Read more